Coordinate Measuring Machine, Manual Probe Head

MH20i Manual indexable probe head that combines the TP20 kinematic stylus module mount with two axis indexing, enabling flexible stylus changing and repeatable probe re-orientation.

The A-axis rotates through ±180° in the X-Y plane. The B-axis rotates through 90° in the Z plane.

MH20 is a manually adjustable probe head with an integral TP20 kinematic stylus module mount.

The A-axis rotates through ±93° in the X-Y plane. The B-axis rotates through ±300° in the Z plane. A thumbwheel locks the swivel in any position within the movement envelope of the head.

The MH8 is a manual indexing probe head with an M8 thread probe connection designed for use on small manual CMMs.

The MH8 can carry any of Renishaw's M8 probes and the reach can be extended by fitting a 50 mm probe extension bar.

A manually indexable head with 720 locking positions, featuring an integral LCD display.

The MIH features an autojoint probe mount for fast, repeatable probe changing. This ensures compatiblity with most Renishaw probes except multiwire (e.g. TP7M).

An integral LCD enables easy programming with the facility to memorise up to 20 probe positions.

PH1 is a small shank mounted manual probe head with movement in the A and B axes, with limited overtravel protection.

The PH1 is a general purpose, swivel-type probe head. Its compact design makes it ideally suited to a CMM where manual orientation of a Renishaw M8 touch-trigger probe is required.

The PH6 is a fixed head with a mount for M8 thread probes.

The PH6 is a small diameter, vertical probe head with one M8 thread probe mount for a single probe, with an integral cable.