Share:
Applications:
Features:
* Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
* Large screen 128×64 matrix LCD, showing all functions and parameters.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
* Seven impact devices are available for special applications. Automatically identify the type of impact devices.(optional)
* Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value, mean value, testing date, impact direction, impact times, material and hardness scale etc.
* Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
* Battery information indicates the rest capacity of the battery and the charge status.
* User calibration function.
* Software to connect with PC via USB port.
* With EL background light.
* Thermal printer integrated, convenient for in field printing.
* NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
* Auto power off to save energy.
* Outline dimensions：212mm×80mm×35mm
Technical Parameter:
Measure scope:170HLD~960HLD.
Testing direction: 360℃.
Testing material:10 varieties.
Hardness scale: HL HRC HRB HRA HB HV HS.
Display:Dot Matrix LCD
Integrated data memory：373-2688 groups measurement series.(Relative to average times 32～1)
Working Voltage: 7.4V
Power supply:5V/1000mA
Recharge time:2.5-3.5hours
Continuous working period: approx. 500 h (no printing and backlight off)
Communication：USB
Standard configuration:
1 Main Unit
1 D type impact device
1 Small support ring
1 piece of Nylon brush (A)
1 High-value leeb hardness test block
1 Communication cable
1 Battery charger
1 Instruction manual
1 data processing software(used with PC)
2 Printer paper
1 box
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other equipment
- Heavy workpiece
- The installed machinery and permanently assembled parts
- The testing surface of a small hollow space
- Material identification in the warehouse of metallic materials
- Rapid testing in large range and multi-measuring areas for large-scale workpiece
Features:
* Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
* Large screen 128×64 matrix LCD, showing all functions and parameters.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
* Seven impact devices are available for special applications. Automatically identify the type of impact devices.(optional)
* Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value, mean value, testing date, impact direction, impact times, material and hardness scale etc.
* Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
* Battery information indicates the rest capacity of the battery and the charge status.
* User calibration function.
* Software to connect with PC via USB port.
* With EL background light.
* Thermal printer integrated, convenient for in field printing.
* NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
* Auto power off to save energy.
* Outline dimensions：212mm×80mm×35mm
Technical Parameter:
Measure scope:170HLD~960HLD.
Testing direction: 360℃.
Testing material:10 varieties.
Hardness scale: HL HRC HRB HRA HB HV HS.
Display:Dot Matrix LCD
Integrated data memory：373-2688 groups measurement series.(Relative to average times 32～1)
Working Voltage: 7.4V
Power supply:5V/1000mA
Recharge time:2.5-3.5hours
Continuous working period: approx. 500 h (no printing and backlight off)
Communication：USB
Standard configuration:
1 Main Unit
1 D type impact device
1 Small support ring
1 piece of Nylon brush (A)
1 High-value leeb hardness test block
1 Communication cable
1 Battery charger
1 Instruction manual
1 data processing software(used with PC)
2 Printer paper
1 box
Inquiry - Portable Hardness Tester (HLN110)
